5mm FBA Axle Shafts - Bully2

These axle shafts are to fit a Bully2 axle.

Made from heat treated chromoly, the shafts will come with either the stock Bully2 stub or the 8mm stub version. You will need knuckles to match the stub shaft. If youre running the Bully2 version, you can run your stock knuckles. If you're running the 8mm stub version, you will need knuckles that accommodate 8mm stub shafts (such as the Dlux knuckles).

**C-hub will need to be drilled to fit the new shafts, If not they will not fit**
Drill to 11.5mm or 7/16"
* You will also need to remove the outer tube baring from the axle housing.

These universal shafts are capable of approx 70* of steering. YOU MUST RUN MECHANICAL STEERING STOPS WHEN RUNNING THESE SHAFTS OR YOU WILL HAVE INSTANT BREAKAGE!

Depending on your locker situation, you may need to file the flat of the tang to fit in your locker.

With each purchase you will get:
2- axle shafts with either 8mm stub shafts or Bully2 stub shafts.

** 8mm stub shafts will require our 8mm knuckle kits with shims **
Dlux Knuckle kits