All New V2 SSDlux Rear Axle

Made from an SSD diamond center

XR10 width

You can make this a high pinion or low pinion

Centered Differential Only.

8mm shafts are 4.5mm heat treated chromoly made for 3mm pins. Hubs sold separately. .600 Hubs give a 9.75" WMS (wheel mounting surface to wheel mounting suface) width.

Axial type shafts are 4.5mm grade 5 Titanium with oversized 6mm diameter at wheel hex and oversized 5mm threads. Most wheels fit with no modification, but on rare occation wheel modification may be required to clear the 5mm threads.