This kit includes all parts needed to convert your current NOD trans to the Ultra-light version:
1- 3mm carbon fiber motor plate
1- 1.5mm carbon fiber non-motor plate
3- aluminum standoffs (orientation is important)
3- stainless steel BH6 screws
1- stainless steel BH3 screw
1- stainless steel BH5 screw
1- stainless steel FH5 screw

*Please pay attention to the orientation of the standoffs, and the locations for the short screws. The offset mounting holes were done to prevent the skidplate mounting screws from running into the gears. For this reason, these kits will come assembled*

These are designed to mount with the motor forward, but can be mounted facing either direction, if clearances require it. If you choose left-motor, your output shafts will be on the right side. Right-motor will have outputs on the left side. All photos show the left-motor trans.

Still uses the same offset 33mm mount spacing as the original NOD trans

Will require you to reuse your bearings, and possibly motor spacer, shims or riser. If you need more of these parts, please email.