Mini Capra Knuckle Weights, fits Axial UTB18

One of the first upgrades for any crawler should be Knuckle Weights. That's why this was the first product we designed for the Mini Capra.

Adds 80.5g per side (2.8oz).

3d printed.

Tungsten slugs and hardware included.

***Requires high clearance 1.9 wheels with a minimum 45.5mm inside diameter.*** Such as our new Dlux high clearance 1.9 wheels.

Tested with hub size 12mm or wider, using the wide wheel hex (plus a minimum 1/8" spacer for our Dlux wheels, 1/4" brass spacer recommended).