These axle shafts and locker kit are made to fit a Bully2 axle.

These universal shafts are capable of approx 70* of steering vs stock B2 (or any CVD type) axles shafts at 50*.

**C-hub will need to be drilled to fit the new shafts, If not they will not fit**
Drill to 11.5mm or 7/16"

Axle tubes need to be drilled out to approx 9/32 or .281 to fit the shaft in the tube.

These universal shafts are capable of approx 70* of steering. YOU MUST RUN MECHANICAL STEERING STOPS WHEN RUNNING THESE SHAFTS OR YOU WILL HAVE INSTANT BREAKAGE!

Each purchase includes:
2pcs axle shafts
1 - locker

Required (not included):
Dlux knuckles.
https://dluxfab.com/Knuckles-Dlux-p83364230