NSDRC Offset Monster Horn

Our new Offset Monster Horn was specifically designed to help gain the clearance the horn and steering link need for many applications, such as servo on axle setups that need the offset of our horn to clear the differential. Chassis mounted servos wanting to run a longer horn but need the extra offset to clear the chassis rails, or to help position the steering link for proper geometry. As well as many other different and custom setups where an offset horn is needed. Made from 7075 aluminum and has a 2.0 Allen head clamping bolt for maximum strength!

24mm Length

4.5mm Thick

4mm rise from the base, and a 4mm elevated offset for a total height of 12.5mm from base to tip.

*Due to the awkward design of the Scx10iii servo mount being so close to the frame/chassis rail (frame had to be notched from factory) you may need to slightly clearance the frame or edge of the servo horn.