Axle upper link mount/Truss/Servo mount for the AR60 axles.

This is a universal product and not intended for a direct fit with any chassis. You may need to modify these parts or existing parts to get them to fit and work correctly.

*Not designed to be used with stock upper link lengths.*

Includes hardware needed to attach to the AR60 axles.

You will need an addtional REVO rod end ball for a spacer. All balls in the rod ends need to be Revo balls or your fit will either have slop or be too tight.

Sporty version are the ones that do not span the entire axle (carbon fiber), Ultra 4 version act as a housing strengthener and DO span the entire axle (aluminum).

The U4 version uses a new style servo mount where the sporty does not. You will need to counter sink the hole in front of the servo for a better fit.

Instructions here:
https://youtu.be/26QI_bdTVXE

Included Parts List:

Front:

1 - Truss Front Plate
1- Truss Rear Plate
8 - Cylindrical Spacers
1 - Servo Mount w/Tapped Mounting Hole
1 - Servo Mount w/Untapped Mounting Hole
15 - M3 x 6mm Button Head Cap Screw
6 - M3 x 8mm Button Head Cap Screw
2 - M3 x 10mm Button Head Cap Screw
1 - M3 x 14mm Button Head Cap Screw
1 - M3 x 25mm Button Head Cap Screw
1 - M3 x 35mm Socket Head Cap Screw
8 - M3 Flat Washer
1 - M3 Nylock Nut

Rear:

1 - Truss Front Plate
1- Truss Rear Plate
6 - Cylindrical Spacers
12 - M3 x 6mm Button Head Cap Screw
2 - M3 x 8mm Button Head Cap Screw
2 - M3 x 10mm Button Head Cap Screw
1 - M3 x 35mm Socket Head Cap Screw
2 - M3 Nylock Nut