These axle shafts are to fit a Bully2. These work with Dlux Knuckles, but will not fit a stock knuckle. When buying Dlux knuckles, choose the 8mm or Axial stub shaft option for these shafts (Do not choose the Bully2 knuckle option, that is for stock shafts only).

These universal shafts are capable of approx 70* of steering vs stock B2 (or any CVD type) axles shafts at 50*.

Axle tubes need to be drilled out to approx 9/32 or .281 to fit the shaft in the tube.

There is no warranty implied on these shafts due to having to use the small, stock tang. If you wish to upgrade to the large tang you can get a set of new gears or you can also save the $60 if you send your locker for me to machine.

Each purchase includes:
2pcs axle shafts
1 - locker (optional)

Required (not included):

Dlux knuckles.

Some